 |
We
pride
ourselves on service, availability and price. |
|
Toll-free:
877.962.8808
Office: 636.733.9009
Fax: 636.733.9008
We are here to serve you, and we believe in customer service to
the fullest. Please call us for help sizing, troubleshooting
or ordering our products.
What
to know before ordering
More about our team
Midwest Gas Equipment, Inc.
184 Chesterfield Industrial Blvd.
Chesterfield, MO 63005
custsvc@midwestgasequipment.com
Driving directions:
From 270 & 40/64
Hwy 40/64 West to Long Road.
Go right at first light, Chesterfield Airport Road. Go right at
second street, Chesterfield Ind. Blvd. Go left into our parking
lot right before the stop sign.
From St. Charles
Hwy 40/64 East to Chesterfield Airport Rd. Travel 1.5 miles and
go right on Chesterfield Ind. Blvd. Go left into our parking lot
right before the stop sign.
See
the Google map
|
|
Same
day shipping
available. |
|
|
Maxitrol
Regulators
Maxitrol®
325 Series L-models are A.G.A./CGA certified (Z21.80/CAN
6.22) for 2-psi or 5-psi inlet, commonly used with CSST or semi-rigid
copper tubing. And the new Z21.80 standard requires the use of
an over-pressure protection device (OPD) for supply pressures
above 2-psi, tested and approved with the regulator. Maxitrol-built
OPDs provide the required downstream over-pressure protection.
Optional automatic vent limiting devices eliminate the need to
run vent piping from the regulator to a safe area. In the event
of a diaphragm rupture, gas escapement is limited to within ANSI
standards. Our manual ball valves are certified as well. All 325
regulators are proudly made in the USA.
|
|
| Model |
Rated
Inlet Pressure |
Certified
To |
| 325-3, 325-5A,
325-7 |
2psi, 5psi,
certified
10psi (non-certified)
|
ANSI 21.18, EN88
Appliance Regulator Standard |
| 325-3L, 325-5AL,
325-7L |
2psi |
ANSI 21.80
Line Regulator Standard |
325-3L47, 325-3L48,
325-5AL-48, 325-5L600
(with over protection device attached) |
5psi |
ANSI 21.80
Line Regulator Standard |
325-5
Lever Acting Design. Maxitrol's 325 Series regulators
are for 2 psi and 5 psi piping systems. Models available for appliance
main burner or pilot applications and as line pressure regulators.
Gases: Natural,
manufactured, mixed, liquified petroleum or LP gas-air mixture.
Type Model
Size PSI and Certification Appliance 325-3 3/8", 1/2" ANSI Z21.18
Certified Appliance Regulator to 5-psi or Non-certified to 10-psi
325-5A 1/2", 3/4", 1" ANSI Z21.18 Certified Appliance Regulator
to 5-psi or Non-certified to 10-psi 325-7 1-1/4", 1-1/2" Non-certified
to 10-psi Line Regulator 325-3L 3/8", 1/2" ANSI Z21.80 Certified
Line Regulator to 2-psi 325-5AL 1/2", 3/4", 1" NSI Z21.80 Certified
Line Regulator to 2-psi 325-7L 1-1/4", 1-1/2" ANSI Z21.80 Certified
Line Regulator to 2-psi LIne Pressure with OPD 325-3L47 3/8",
1/2" 325-3L with OPD47 factory installed to 5-psi 325-3L48 1/2"
325-3L with OPD48 factory installed to 5-psi 325-5AL48 1/2", 3/4"
325-5AL with OPD48 installed to 5-psi 325-5AL600 3/4", 1" 325-5AL
with OPD600 installed to 5-psi 325-7L210D 1-1/4", 1-1/2" 325-7L
with OPD210D installed to 5-psi.
|
| Maxitrol®
RV/CV Series
These rubber
seat poppet type regulators are designed primarily for main
burner and pilot load applications where precise control of
tiny flows is an essential operating requirement. ® certified
(.15 CFH).
Housing
are of high strength alumunium die castings. All models, with
the exception of D suffix models, have been tested for multi-poise
mounting and may be installed in any plane or angle without
restriction. D suffix models are to be mounted horizontally.
Other than normal upright position will result in slight difference
of outlet pressure. They may be used with natural, manufactured,
mixed, LP or LP gas-air mixture.
Midwest
Gas Equipment home |
|
|
